db-146 april 2009, revision a page 1 tak cheong ? semiconductor 200mw sod-523 surface mount very small outline flat lead plastic package zener voltage regulators green product absolute maximum ratings t a = 25c unless otherwise noted symbol parameter value units p d power dissipation 200 mw t stg storage temperature range -55 to +150 c t opr operating temperature range -55 to +150 c these ratings are limiting values above which the serviceability of the diode may be impaired. specification features: ? wide zener voltage range selection, 2.4v to 75v ? flat lead sod-523 small outline plastic package ? extremely small sod-523 package ? surface device type mounting ? rohs compliant ? green emc ? matte tin(sn) terminal finish ? band indicates cathode electrical characteristics t a = 25c unless otherwise noted v z @ i zt (volts) device type device marking min nom max i zt (ma) z zt @ i zt ( ) max i zk (ma) z zk @ i zk ( ) max i r @ v r ( a) max v r (volts) mm5z2v4b 05 2.35 2.4 2.45 5 100 1 564 45 1 mm5z2v7b 15 2.65 2.7 2.75 5 100 1 564 18 1 MM5Z3V0B 25 2.94 3.0 3.06 5 100 1 564 9 1 mm5z3v3b 35 3.23 3.3 3.37 5 95 1 564 4.5 1 mm5z3v6b 45 3.53 3.6 3.67 5 90 1 564 4.5 1 mm5z3v9b + 5 3.82 3.9 3.98 5 90 1 564 2.7 1 mm5z4v3b 65 4.21 4.3 4.39 5 90 1 564 2.7 1 mm5z4v7b 75 4.61 4.7 4.79 5 80 1 470 2.7 2 mm5z5v1b 85 5.00 5.1 5.20 5 60 1 451 1.8 2 mm5z5v6b 95 5.49 5.6 5.71 5 40 1 376 0.9 2 mm5z6v2b a5 6.08 6.2 6.32 5 10 1 141 2.7 4 mm5z6v8b b5 6.66 6.8 6.94 5 15 1 75 1.8 4 mm5z7v5b c5 7.35 7.5 7.65 5 15 1 75 0.9 5 mm5z8v2b d5 8.04 8.2 8.36 5 15 1 75 0.63 5 mm5z9v1b e5 8.92 9.1 9.28 5 15 1 94 0.45 6 mm5z10vb f5 9.80 10 10.20 5 20 1 141 0.18 7 mm5z11vb g5 10.78 11 11.22 5 20 1 141 0.09 8 mm5z12vb h5 11.76 12 12.24 5 25 1 141 0.09 8 mm5z13vb j5 12.74 13 13.26 5 30 1 160 0.09 8 mm5z15vb k5 14.70 15 15.30 5 30 1 188 0.045 10.5 mm5z16vb l5 15.68 16 16.32 5 40 1 188 0.045 11.2 mm5z18vb m5 17.64 18 18.36 5 45 1 212 0.045 12.6 electrical symbol mm5z2v4b through mm5z75vb anode sod-523 flat lead cathode
db-146 april 2009, revision a page 2 tak cheong ? semiconductor electrical characteristics t a = 25c unless otherwise noted v z @ i zt (volts) device type device marking min nom max i zt (ma) z zt @ i zt ( ) max i zk (ma) z zk @ i zk ( ) max i r @ v r ( a) max v r (volts) mm5z20vb n5 19.60 20 20.40 5 55 1 212 0.045 14.0 mm5z22vb p5 21.56 22 22.44 5 55 1 235 0.045 15.4 mm5z24vb r5 23.52 24 24.48 5 70 1 235 0.045 16.8 mm5z27vb s5 26.46 27 27.54 2 80 0.5 282 0.045 18.9 mm5z30vb t5 29.40 30 30.60 2 80 0.5 282 0.045 21.0 mm5z33vb u5 32.34 33 33.66 2 80 0.5 306 0.045 23.0 mm5z36vb v5 35.28 36 36.72 2 90 0.5 329 0.045 25.2 mm5z39vb x5 38.22 39 39.78 2 130 0.5 329 0.045 27.3 mm5z43vb y5 42.14 43 43.86 2 150 0.5 353 0.045 30.1 mm5z47vb z5 46.06 47 47.94 2 170 0.5 353 0.045 33.0 mm5z51vb ? 5 49.98 51 52.02 2 180 0.5 376 0.045 35.7 mm5z56vb =5 54.88 56 57.12 2 200 0.5 400 0.045 39.2 mm5z62vb 5 60.76 62 63.24 2 215 0.5 423 0.045 43.4 mm5z68vb >5 66.64 68 69.36 2 240 0.5 447 0.045 47.6 mm5z75vb <5 73.50 75 76.50 2 255 0.5 470 0.045 52.5 v f forward voltage = 1 v maximum @ i f = 10 ma for all types notes: 1. the zener voltage ( v z ) is tested under pulse condition of 10ms. 2. for detailed information on price, availability and delivery of nominal zener voltages between the voltages shown and tighte r voltage tolerances, contact your nearest tak cheong electronics representative. 3. the zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an rms value equal to 10% of the dc zener current ( i zt or i zk ) is superimposed to i zt or i zk.
db-146 april 2009, revision a page 3 tak cheong ? semiconductor rating and characteristic curves fig.1 typical forward voltage fig.2 effect of zener voltage on zener impedance fig.4 typical capacitance fig.5 zener breakdown characteristics fig.6 zener breakdown characteristics 0 50 100 150 200 250 0 25 50 75 100 125 150 175 200 temperature [ ] power passipation, mw fig.3 power dissipation vs. ambient temp.
db-146 april 2009, revision a page 4 tak cheong ? semiconductor flat lead sod-523 package outline note: dimensions are exclusive of burrs, mold flash & tie bar extrusions. fig.7 typical leakge current
number: db-100 april 14, 2008 / a disclaimer notice tak cheong ? notice the information presented in this document is for reference only. tak cheong reserves the right to make changes without notice for the specification of the products displayed herein. the product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controlle rs and other safety devices), tak cheong semiconductor co., ltd., or anyone on its behalf, assumes no responsi bility or liability for any damagers resulting from such improper use of sale. this publication supersedes & replaces all information reviously supplied. for additional information, please visit our website http://www.takcheong.com , or consult your nearest tak cheong?s sales office for further assistance.
|
